vendredi 3 octobre 2014

Need some advice with clutch cylinders (pics)

Hello, today i decided to install the repair kits for slave and master cylinder to my 160 (mexican) Tf but still have some doubts on how to do it.



http://ift.tt/YYzdY4



and



http://ift.tt/1rH6lR4



i removed the master cylinder with no problem.

http://ift.tt/1rH6m7k



im trying to fit this: http://ift.tt/1rH6m7k



when trying to remove i saw there is a kind of pin with to small holes that retain the whole thing inside:

http://ift.tt/1rH6m7k

http://ift.tt/1rH6m7k



So my guess is that i must close the pin in order to pull out and replace the part. I dont have that tool so ill see what i can do. First i need to know if that is the correct way to replace the part :)



After that i moved on with the slave clutch. No problem on removal. But once it was out i found this:

http://ift.tt/1rH6m7k

http://ift.tt/1rH6m7k

http://ift.tt/1rH6m7k

http://ift.tt/1rH6m7k



Seems to me that the inner seal was gone due to age/use. I guess that explains my struggle to get into reverse or gears sometimes.

So my next doubt came when fitting new seal. I dont Know how is the correct direction to fit it:

1: http://ift.tt/1rH6m7k

or

2: http://ift.tt/1rH6m7k



So that was todays adventure with my tf.



i hope some of you can give me some advice on how to fit those things.

Thanks in advance. :coffee:





from the last news http://ift.tt/1rH6m7y

via IFTTT

Libellés : ,

0 commentaires:

Enregistrer un commentaire

Abonnement Publier les commentaires [Atom]

<< Accueil