Won't start

I'm in urgent need of some help - once again! My 45 won't start now after changing the priming bulb this afternoon.



I've had a little cold starting problem for some time now which I've been trying to track down one step at a time. I checked the pump timing recently and that was spot on. I checked the supply to the glow plugs, and that was ok. I then removed two of them and tested them on the bench with a battery, and they were ok.



Since the priming bulb always seems to be a bit soft, I concluded that the problem was a slight air leak somewhere, so I checked all the leak-off pipes, etc, and they were ok. I then decided to fit a new priming bulb, so I ordered one off Ebay. It arrived on Friday, so I fitted it yesterday - along with a new fuel filter. It was faulty, just wouldn't pump, so I put the old one back on this afternoon. Now the bloody car won't start!



I've bled the system at the fuel filter and fuel comes through ok after expelling a small amount of air. I've bled the injectors (although I'm not sure I'm doing it correctly - be grateful for some advice on that) - but it just won't have it. I've run the battery down now, so that's on charge for a few hours.



Any suggestions about what I should try next?

from the last news http://ift.tt/1xdcQro

via IFTTT