Coolant switch issue rover 45
Hello everybody, im new here and i have searched the forums but cannot find anything matching my issue.
I have just changed the clutch in my rover 45, sometime during this i managed to pull the wires out of the plug for the coolant temp sensor, i didnt notice this until much later.
I cant solder the wires together as theres nowhere to solder them to so
Ive removed the plastic connector that the wires are usually attached to and crimped the ends with connectors that would normally be used to connect speakers/ speaker wires. In other words im connecting the wires directly to the sensor. I have the wires connected in the correct places but now the fans including then AC fan are just on flat out, clearly my fix is not a fix at all, any ideas? Thanks in advance
I have just changed the clutch in my rover 45, sometime during this i managed to pull the wires out of the plug for the coolant temp sensor, i didnt notice this until much later.
I cant solder the wires together as theres nowhere to solder them to so
Ive removed the plastic connector that the wires are usually attached to and crimped the ends with connectors that would normally be used to connect speakers/ speaker wires. In other words im connecting the wires directly to the sensor. I have the wires connected in the correct places but now the fans including then AC fan are just on flat out, clearly my fix is not a fix at all, any ideas? Thanks in advance
from the last news http://ift.tt/1EdRUbV
via IFTTT
Libellés : IFTTT, the last news
0 commentaires:
Enregistrer un commentaire
Abonnement Publier les commentaires [Atom]
<< Accueil