sticking clutch arm possible solution

hello all



have any of you got a sticking clutch arm or a squeaking clutch arm?



well if spaying the arm with oil or grease or wd40 don't work



try this.



get a drill and very small drill bit, and drill into the gear box just under where the clutch arm goes in the box, drill at a 45 degree angle, as close to the clutch arm as possible. you only need to drill in about 10mm just enough until you hit the clutch arm, then spay wd40 in the hole, and work the clutch peddle a few time and then fill the hole with grease.



it stopped mine from squeaking and its much smoother now.

from the last news http://ift.tt/1tl5Dqt

via IFTTT