samedi 31 décembre 2016

SCU/BCU question

So I think my SCU has gone kaput. Fob is no longer functioning 95% of the time but it can sometimes operate.

The car is currently armed so will obviously not allow reprogramming of anything currently.

Wondering if a 1.4 ZR SCU will be hot swappable if I get the fobs from that too. They are both pektron.

I am under the impression there is no link to the ECU at all beyond the basic "turn on/off" command on the immobiliser.

Is this correct? Some people have sown the seeds of doubt with anecdotal evidence, but I don't know how competent they were in installation.

Would like some advice from people with actual experience, not just what they've read on some random article somewhere unless it's well sourced. People like Paul from Technizen would no doubt have the answer but I have no clue as to how often he pops in, thanks.

This article passed through the Full-Text RSS service - if this is your content and you're reading it on someone else's site, please read the FAQ at http://ift.tt/jcXqJW.
Recommended article: The Guardian's Summary of Julian Assange's Interview Went Viral and Was Completely False.



SCU/BCU question

Libellés :

How to improve headlights ?

How to improve headlights ?


Hello people happy Holidays,merry christmas happy new year,
i wish you all the best,
i own honda accord mk5, same as rover 600 petrol f20z1
unfortunately my headlights have condensation a lot, i changed them several times with used 2nd hand hella genuine oem, no luck still same i isolate them with silicone and i am tired.
i heard people bought Chinese PLASTIC headlights with projector lenses are these any good ?
i currecntly have
55W LOW BEAM xenon headlights without projector
if i fit plastic headlights chinese with projector lenses again 55w
will i see far more will i receive better vision ,any ideas ?
i think glass is higher quality but all new cars use plastic and they have great headlights.
Please advice.

This article passed through the Full-Text RSS service - if this is your content and you're reading it on someone else's site, please read the FAQ at http://ift.tt/jcXqJW.
Recommended article: The Guardian's Summary of Julian Assange's Interview Went Viral and Was Completely False.



How to improve headlights ?

Libellés :

Leather Seat colour change/refurb

Leather Seat colour change/refurb


On with refurbing and change'ing the colur of the leather (prob vinyl) seat bolsters in the car.
They were Black with blue on the bolsters, so dyeing the blue so its all Black.

I will post some pics later of Before, during the job and after.

Hope it stays on and wears well, fingers crossed.

This article passed through the Full-Text RSS service - if this is your content and you're reading it on someone else's site, please read the FAQ at http://ift.tt/jcXqJW.
Recommended article: The Guardian's Summary of Julian Assange's Interview Went Viral and Was Completely False.



Leather Seat colour change/refurb

Libellés :

Mgf/tf steel wheels

[unable to retrieve full-text content]

Hi all i am looking for some steel wheels from an mgf possibly full size spare? 14inch and a 4x95.25 pcd I need at least 2 for now. Thanks.

Mgf/tf steel wheels

Libellés :

vendredi 30 décembre 2016

Please help me Revive my Rover 600! Several questions please advice! :)

Hello people
Happy holidays i write u from abroad ,
so i live in very small countrie BG,
here not much left from rover 600 series
parts are hard to find and expensive,
i recently revived my front coil spring i found old stocks on ebay boge,
i like them a lot!
Before Coil springs boge i used CS GERMANY, they died in 1-2 years so i spend money for nothing here shops sale garbage parts ,
Please i beg you people help me find a decent rear set or coil springs
I want factory original genuine or lemforder or boge,
i dont want my car to be lower its low enough already i preffer everything to be in stock conditionalso my shocks are kayba all 4 or them they are fine for now,
recently my alternator died , when some electric car guy measure it when i put my headlights we see alternator charge my ac car battery at 12v this is not enough, it can be brushes inside alternator it can be everything,
So far i changed 6 different alternators from denso /mitsuba/ to bosh to whatever all of them was used and crap they dont last a long time, where i can get a new one at good price,
i recently graduate from school
thisi s my first car i love it so much i invested more than 7000gbp PARTS and labour alone ,they charge me like crazy here this includes car price + taxes + parts + labour, everything so far.
My other trouble is as far as u know honda accord same years mk 5 use same engine etcs,so my car is actually accord mk5 but they use same parts as rover 600 i hope its not a problem, my headlights have lots of condensation inside i changed them all these years i own the car for like 5-6 years and i changed hella headlights with used several times and still no luck is there any way i can perm,fix them ?

I also dont have abs is it possible to install one ?
We recently fitted brand new abs brake pump,we also fitted new master cylinder and brake booster so my brake pedal is now above /up with my last brake master it was down, i plan to upgrade my brake disks from 260 to 280mm where i can get a genuine oem brake disks and brake pads good one for front?
thanks a lot people
i hope to receive nice answers.

This article passed through the Full-Text RSS service - if this is your content and you're reading it on someone else's site, please read the FAQ at http://ift.tt/jcXqJW.
Recommended article: The Guardian's Summary of Julian Assange's Interview Went Viral and Was Completely False.



Please help me Revive my Rover 600! Several questions please advice! :)

Libellés :

MG TF X-Power Private Plate

Supporter

 
Craigie TF's Avatar
 

Join Date: May 2007

Car: MGTF Cool Blue S.E. (LE500 Black Spec) Mercedes 230 SLK, Volvo C70 Cabrio

Posts: 4,525

MG TF X-Power Private Plate


MG TF X-Power Private Plate

I have for sale the private plate M9 TFX

This plate looks amazing on an MG TF.

This plate has never been issued to a car before so is very rare indeed, I have owned it for a number of years but never used it.

The plate is on a DVLA retention certificate with all fees included, as soon as payment is received I will post it off to the DVLA to have it put into the buyers name, you can then transfer it to your car straight away.

This plate will only go up in value over time, making it a great investment.

£500 ono

This article passed through the Full-Text RSS service - if this is your content and you're reading it on someone else's site, please read the FAQ at http://ift.tt/jcXqJW.
Recommended article: The Guardian's Summary of Julian Assange's Interview Went Viral and Was Completely False.



MG TF X-Power Private Plate

Libellés :

Nut Size

Registered User

 

Join Date: Mar 2007

Location: Bridgend South Wales

Car: Rover 620ti, 2x 1996 MGF, 4x MG TF, Mazda Bongo, 2x 1999 MGF, 1972 Ford Cortina Mk3 Vauxhall Corsa

Posts: 1,136

Thought the bumpers on the TF and the later Chinese versions (LE500 etal) were the same???.....the mountings are different on the F to the TF which needs the crash bar armature changed

This article passed through the Full-Text RSS service - if this is your content and you're reading it on someone else's site, please read the FAQ at http://ift.tt/jcXqJW.
Recommended article: The Guardian's Summary of Julian Assange's Interview Went Viral and Was Completely False.



Nut Size

Libellés :

Spax Problem part

HI I live in SE London there are speed bumps every 100 yards.
Fitted spax shocks and springs with new bolts 18 months ago to my 03 TF. Reckon I still need to soften up some more.
Have just broken the bolt that secures the Shock to the upper suspension arm on the back driver side.
Heard it break on a hump and car sat down hard 200 meters from home.
Wheel off. Problem obvious.
I have remarkably managed to get the broken bolt out of the arm.
Ordered new bolts. Now I realise the spax shocks use a collar/washer/bush either side of the shock which sits into a recess in the arm.
One is lost. Does anybody have an idea of what I can use or does anybody have an old spax shock with the collars still in place lying about.
No car till sorted.

Good wishes for New Year
Kevin R (Rev)

This article passed through the Full-Text RSS service - if this is your content and you're reading it on someone else's site, please read the FAQ at http://ift.tt/jcXqJW.
Recommended article: The Guardian's Summary of Julian Assange's Interview Went Viral and Was Completely False.



Spax Problem part

Libellés :

Air bag ecu

[unable to retrieve full-text content]

Air bag light came on yesterday. Pluged in fault finder to read codes. but cannot find ecu through the code reader. Any clues ???? Thanks in advance.

Air bag ecu

Libellés :

Hi from Germany

WinkHi from Germany

Hi , I live in Bavaria and I am a member from the MG-Rover Club Lower Bavaria.
My Rover Vehicles are 4 45 RT 2 Sedans 1.8, 1.6 and 2 Hatchback 1,6 and 2.0 but 1 Sedan ist crasht from a stupid lady and this 45 are ready to die.
2 are british racing green 1 steelblue and one anthracite.
on Jan. 2017 we start with a own Forum incl Market for Parts and MG- Rovers
We have a big store with new and used parts for all MG-Rover Cars and we can fix it but just for members.
Thats shortly more next.
Bye Lee

This article passed through the Full-Text RSS service - if this is your content and you're reading it on someone else's site, please read the FAQ at http://ift.tt/jcXqJW.
Recommended article: The Guardian's Summary of Julian Assange's Interview Went Viral and Was Completely False.



Hi from Germany

Libellés :

Performance Brake pads

Supporter

 

Join Date: Aug 2014

Location: Lutterworth

Car: Rover 25 day Plus trackcar build

Posts: 164

Performance Brake pads


Hi
I use my rover 25 for sprinting at the minute and have swaped brakes and calipers to vented discs off the mgzr 120, makes for a great set up with 15" wheels.
I have Mintex xtreme pads at the minute fitted, I love them they work from cold and still perform when very hot. I don't seen to be able to get this pad now any other pad ideas ??? I need them to work from cold .
Thanks

This article passed through the Full-Text RSS service - if this is your content and you're reading it on someone else's site, please read the FAQ at http://ift.tt/jcXqJW.
Recommended article: The Guardian's Summary of Julian Assange's Interview Went Viral and Was Completely False.



Performance Brake pads

Libellés :

Weird 'Melting' 75 Art

post #1 of 2 (permalink) Old Today, 08:20 Thread Starter

Supporter

 
MoonManMike's Avatar
 

Join Date: Aug 2008

Location: Hoddesdon, Herts

Car: MG TF 135 Sprint

Posts: 9,971

Blog Entries: 15

Weird 'Melting' 75 Art


I don't know if this has been posted before, but thought you guys may appreciate this:

http://ift.tt/2hBpjKE


Last edited by MoonManMike; Today at 08:33.

MoonManMike is offline  

This article passed through the Full-Text RSS service - if this is your content and you're reading it on someone else's site, please read the FAQ at http://ift.tt/jcXqJW.
Recommended article: The Guardian's Summary of Julian Assange's Interview Went Viral and Was Completely False.



Weird 'Melting' 75 Art

Libellés :

jeudi 29 décembre 2016

MG ZS SUV video on YouTube

MG ZS SUV video on YouTube


Someone on YouTube has managed to get hold of some advertising for the new MG ZS small SUV:
Why haven't MG decided to show off the interior?

Notice the strategic use of Red, White and Blue for the vehicles?

Cheers..

This article passed through the Full-Text RSS service - if this is your content and you're reading it on someone else's site, please read the FAQ at http://ift.tt/jcXqJW.
Recommended article: The Guardian's Summary of Julian Assange's Interview Went Viral and Was Completely False.



MG ZS SUV video on YouTube

Libellés :

lambda sensors

Registered User

 

Join Date: Feb 2015

Location: Livingston

Car: MGTF Spark LE. 99 MGF VVC

Posts: 47

lambda sensors


hi... are the 2 sensors on 2004 exhausts the same part... can't get the cat one off, it's totally rounded. I have stripped the exhaust and replacing full system. I unclipped it at back of ECU and pulled through. just can't get it off, even after copious amounts of release fluid and heat...

This article passed through the Full-Text RSS service - if this is your content and you're reading it on someone else's site, please read the FAQ at http://ift.tt/jcXqJW.
Recommended article: The Guardian's Summary of Julian Assange's Interview Went Viral and Was Completely False.



lambda sensors

Libellés :

Normal MG ZR 103ps power/torque curve?

post #1 of 2 (permalink) Old Today, 14:11 Thread Starter

Supporter

 
Dorchester's Avatar
 

Join Date: May 2015

Location: Bioule, near Montauban, South West of France

Car: Rover 25 1.4 110bhp 3d petrol 2002 MNX 45k ml / Fiat Punto convertible 1995 Bertone 1.6 90bhp

Posts: 511

QuestionNormal MG ZR 103ps power/torque curve?

The title says nearly all.

Having a new spare ECU very finely remapped by SAWS Tuning (@lolsteve98) on my Rover 25 1.4 103ps, now with Torque Pro and a E327 device I'm able to know my new figures. It would be nice to be compared with.

So I would be delighted if anyone can post a graph / chart with the actual figures of a standard MG ZR 105 before / without remap, made with a good Dyno.

Thanks a lot.

Dorchester is online now  

Let's block ads! (Why?)



Normal MG ZR 103ps power/torque curve?

Libellés :

Bleeding sheddt clutch kit

Registered User

 

Join Date: Feb 2014

Location: North Essex, near Stansted

Car: Rover 45

Posts: 52

Bleeding sheddt clutch kit


In time honored fashion I thought I would throw some money at a problem hoping to get it sorted.

Enter the sheddist clutch kit.

I received it this morning from Dark Ice and it went on easily - very pleased. Called the boy down to help bleed it, 30 minutes and I can go for a drive I thought. Er, no.

Bleeding the kit has seemed almost impossible. I even rigged up the motorcycle 'pressure bleeder' that I made from a replacement washer bottle to reverse bleed it from the slave cylinder. Still no joy. Basically no fluid is passing from the reservoir into the master cylinder.

Does anyone have any tips on this? I didn't 'bench bleed' the master cylinder just followed the instructions that came with the kit.

Any help is much appreciated.

Let's block ads! (Why?)



Bleeding sheddt clutch kit

Libellés :

Cylinder Head Gasket Help!

I'm new this so hi everyone!

I bought my 02 reg TF in June and had to get the head gasket done in July. Cost me £780 by a really reputable local garage (not mg specific) skimmed and several parts changed, they told me it would go again but should last about 3 - 4 years.

But nope, overheating again and back to the garage five months on, head gasket's gone again (not back to the same garage as it's closed until after new years so planning on taking it back there when it's open again to see what they say)...

So what can I do?! I'd hate to have to get rid of it, that's the very last thing I want to do but there's no way I can afford to spend 800 quid every five months to have the same parts replaced?! Are there any alternatives and is it my fault this has happened? I avoid driving it at high revs until the oil's warm and it only ever gets to +3000 revs if I'm over 70mph on the motorway... Have I been careless with it or is this inevitable and unresolvable...

Let's block ads! (Why?)



Cylinder Head Gasket Help!

Libellés :

Tensioner?

post #1 of 1 (permalink) Old Today, 09:28 Thread Starter

Registered User

 

Join Date: Apr 2013

Location: Eye, Suffolk

Car: 98 rover 400 Gsdi, R33 Skyline gtst, Mk2 Honda CRX Vtec

Posts: 200

Tensioner?


Hi, just wondering if anyone can identify the correct name for this part? Fan belt tensioner? As I need a new one, pretty sure the bairings have gone and sounding worse every day.. Also if anyone can point me to a company that would stock one and a part number, I would be very greatfull.. Thanks.. James.

https://youtu.be/TGT2Xwht8DY

rocket_rover is offline  

Let's block ads! (Why?)



Tensioner?

Libellés :

mercredi 28 décembre 2016

What do you think the new small SUV will be called in the U.K?

What do you think the new small SUV will be called in the U.K?


Given that MG Motor U.K have already said that the new small SUV isn't going to be called the ZS (probably because of the old Honda Domani based MG model still being in everyone's mind when you mention the letters ZS) I reckon that they will call it the MG FS after (F) for Fun and (S) as in Sport UV.

I am aware that the same initials could also be used in profanity but I reckon that given the bigger model is called the GS as in possibly standing for Grand Sport UV this could be a go-er.

My second choice would be CS as in (C) in Compact and (S) as in Sport UV but that sounds too boring.

Cheers..

Let's block ads! (Why?)



What do you think the new small SUV will be called in the U.K?

Libellés :

The reasoning behind the new GS facelift

An interesting Chinese article about why the GS (known in China as the Rui Teng which is somehow translated as Maxplan) has been facelifted so soon after release plus the choices made to why the new bumpers look like the way that they do.

It's a copy and paste from the Google translation so the grammar is a bit off.

SAIC re-found their new real Teng real shot experience
At 00:32 on December 20, 2016

In early 2015, SAIC MG Maxplan officially listed this to "8 seconds Pobai" as a keyword urban SUV has become a very famous popular models. Fleeting twenty months, during which more joint venture brands, Chinese brand SUV car after another emerged, many of them more than Maxplan comprehensive stronger opponents, Maxplan light longer, some even lost their direction. Thinking and change, new Maxplan a timely, SAIC passenger car design director Shao Jingfeng Turning Maxplan changes when admitted to optimize a car designed from the ground than the more difficult. Today, let us look at the new Maxplan how to re- discover themselves, find their own motion in mind.

With the domestic SUV market gradually broken down, emphasis on road performance of a compact SUV has become a popular choice in this market segment, but strong dynamic performance often means higher prices, for consumers, not so natural acceptance High. SAIC From this perspective, hoping to build a bias road performance, price and close to the people enough for the average consumer SUV models. Design Director at SAIC Shao Jingfeng eyes, Maxplan since the date of birth is different route to go, it has the same level of the more outstanding performance, but also has good color value and a higher price.

But Rui Teng advantage of this performance in a growing number of high cost Chinese brand SUV under the impact of gradually being drowned out. Chinese consumers purchase link priority is still to spend less money to buy more configuration, therefore, Maxplan by timing facelift, the focus in the cost under the martial arts. However, Rui Teng sports personality can not be lost, and the need to highlight, which is also Shao Jingfeng optimization Maxplan car's exterior design when the major work done.

Introduced at the beginning of the new car, Shao Jingfeng raised two key concepts - "Inheritance" and "evolution" of Maxplan upgrade is not to overthrow the past, but a find their own process. For example, the front part of the old section Maxplan on the grill too narrow lower grille size is too large, not very coordinated visual proportions, the new Maxplan targeted into the design process more public aesthetic preference, In front of the car has also become more balanced.

New Maxplan low to high before the high waist design, coupled with both sides of the front and rear bumper air knife decorative trim, creating a subduction gesture, also felt a sense of performance. In explaining the design process, the new Shao Jingfeng Maxplan styling and an eager, leaned pediment echoes the shape of a bull formed on.

New Maxplan still using two sizes and styles of wheels, 1.5T and 2.0T models top models use the 18 inches double five-spoke wheels and color specifications for the 235/50 R18 Michelin tires, and the remaining five models 17 Inch monochrome alloy wheels, tire size 215 / 60R17.18 inch wheel design sense of stronger, visual effect was stronger than the 17-inch wheels.

In addition to the obvious design improvements, the new Maxplan on the external configuration is also slightly optimal adjustment, the LED daytime running lights which previously appeared only on the higher allocation of four models, and now for the whole system comes standard, along with canceled the is the front fog lamps . In addition, the electric heating function electrically adjustable exterior mirrors and parking radar function is also spread to all models.

After redefining the design direction, the new Maxplan more emphasis on luxury and comfort to create the atmosphere of the interior, which was in line with the demands of the people to a car. In the control area, the new Maxplan use more soft material covered, and uses double stitching process, so that the visual and tactile have a good experience.

In addition to material changes, the center console design has also made a more substantial improvement, and to provide amber brown and knight black two styles to choose from. Irregular air conditioning vents on either side of the center console into a sporty highlights the circular outlet, flat-bottomed multifunction steering wheel in addition to a minimum of two distribution models are equipped with an outer, top models are joined shift paddles.

From New Maxplan internal configuration of view, the overall staffing levels compared with the old models and not a qualitative leap, and support for Apple's new CarPlay Baidu CarLife functional multimedia system for the young consumers, be a highlight.

Power systems, the new Maxplan no change in the power system, still for the 1.5T and 2.0T two engines , both of maximum power respectively 169 and 220 horsepower and peak torque of 250 Nm and 350 Nm . Timely four-wheel drive system is still only 2.0T only top models, the new car also Maxplan only equipped with shift paddles models.

New Maxplan Reloaded, and fellow brothers, "the world's first mass-produced Internet the SUV " Roewe RX5 compared to a little less then a topic of conversation, even with the past "eight seconds Pobai" himself is no longer so young compared to gas Sheng. However, the new Maxplan been tempered by time, more of a calm, know better their performance advantages, but also understand how to show real strength give consumers more Rongyijieshou. Overhaul of external and connotation, advancing with the configuration, and the price more affinity, the new Maxplan combines these qualities once again starting to accept the market test. (Text / / photo qichezhijia Chenjia Xu Ze stone)

Source URL:

¡¾Í¼¡¿ÖØз¢ÏÖ×Ô¼º ÉÏÆûпîÈñÌÚʵÅÄÌåÑé_Æû³µÖ®¼Ò

Cheers..

Let's block ads! (Why?)



The reasoning behind the new GS facelift

Libellés :

Bleeding sheddt clutch kit

Registered User

 

Join Date: Feb 2014

Location: North Essex, near Stansted

Car: Rover 45

Posts: 49

Bleeding sheddt clutch kit


In time honored fashion I thought I would throw some money at a problem hoping to get it sorted.

Enter the sheddist clutch kit.

I received it this morning from Dark Ice and it went on easily - very pleased. Called the boy down to help bleed it, 30 minutes and I can go for a drive I thought. Er, no.

Bleeding the kit has seemed almost impossible. I even rigged up the motorcycle 'pressure bleeder' that I made from a replacement washer bottle to reverse bleed it from the slave cylinder. Still no joy. Basically no fluid is passing from the reservoir into the master cylinder.

Does anyone have any tips on this? I didn't 'bench bleed' the master cylinder just followed the instructions that came with the kit.

Any help is much appreciated.

Let's block ads! (Why?)



Bleeding sheddt clutch kit

Libellés :

Intercoler

Intercoler


Hi folks
Mg zr td is off the road for winter and streetwise td is on for winter, am going to fit new intercooler where the air con rad was and reroute the intercooler pipes. But can anyone tell me have they ever tried to do a straight air feed straight into the air filter box from the front spoiler by cutting appropriate hole in spoiler. am not looking for any sort of gains it's just that the air feed seems to be located behind headlamp and then into u shaped pipe then up into the air box which to me seems restrictive.
Have perfect black mesh cover for spoiler and car will only be used in summer months

Let's block ads! (Why?)



Intercoler

Libellés :

First Used/First Registered?

First Used/First Registered?


Looking up the details of a MG I'm interested in and the DVLA have it down as "First Used" in October 2006, and "First Registered" in July 2015. It was supposedly built in 2006. I don't have the VIN and can't ask the seller as they are closed until the New Year.
I assume it was registered with a private plate until July 2015 when it was then registered with the current plate.

Let's block ads! (Why?)



First Used/First Registered?

Libellés :

Hesitation / Vibration.

post #1 of 1 (permalink) Old Today, 11:07 Thread Starter

Registered User

 

Join Date: Oct 2016

Location: Woking

Car: Rover 45

Posts: 17

Hesitation / Vibration.


Hi Guys.

I have a strange issue with my 1.8 45 Auto.

When I am traveling at a steady 35 to 38 mph and about 1700 to 1800 rpm the car has a strange sensation which is difficult to describe.
It is in between a vibration and a hesitation. A bit like driving over a mild rumble strip.
If I accelerate, it disappears, or if I slow down it disappears. If I stay at that speed with the rumble the EML starts flashing. If I change speed and wait a few seconds the EML stops flashing.
It may be my imagination but I think it is happening more regularly. Possibly when I stay at a constant speed. It doesn't do it while cruising on the motorway at higher speeds.

Strange huh? Any ideas?

Alan Morriss is offline  

Let's block ads! (Why?)



Hesitation / Vibration.

Libellés :

Replacing instrument panel IPK with used one

Registered User

 

Join Date: Jul 2016

Car: KV6 2.5 Petrol Conn SE

Posts: 10

Replacing instrument panel IPK with used one


Hello guys,
I have found used IPK panel(with tacho, speedo etc) with very good LCD screen to replace my old one which has very faulty(unreadable) LCD screen.

I found some threads about resoldering eeprom unit from my IPK to the "new" one, but i haven't found how EEPROM looks like.
Any suggestions?

And one more, how can i code it to my car?

Thanks

Let's block ads! (Why?)



Replacing instrument panel IPK with used one

Libellés :

Normal 25 1.4 103bhp torque chart?

I would like to compare my remapped ECU very well done by @lolsteve98 (SAWS Tuning) with the regular ECU of a standard 25 1.4 103bhp (in good order of course!) before / without remap.

Could a MG ZR 1.4 105 have a similar chart as a 25? In that case, a MG ZR chart before / without remap would be convenient as well.

Thanks to Torque Pro looking in my new remapped ECU, I assume that I shall be able to get out a chart.

Thanks to any of you able to post that "normal" torque chart.
And Happy new year 2017 to you all with my best wishes.

Let's block ads! (Why?)



Normal 25 1.4 103bhp torque chart?

Libellés :

mardi 27 décembre 2016

best place for axle stands / wishbone removal?

post #1 of 1 (permalink) Old Today, 05:20 Thread Starter

Registered User

 

Join Date: May 2010

Car: MGF

Posts: 1,745

Questionbest place for axle stands / wishbone removal?

will be lowering my front subframe to get the wishbones out / lower front arms

where will be the best places for the axle stands?

will i need to remove the front sub frame mounts behind front bumper or will the rear front ones give enough drop?

also looking at replacment bolts online rimmers seem to have different size lengths?

thanks

super_cds is online now  

Let's block ads! (Why?)



best place for axle stands / wishbone removal?

Libellés :

Admins please help! New user not getting emails

Registered User

 

Join Date: Apr 2009

Location: Teesside

Car: S14 200sx. R33 4 door Skyline. Z32 300zx Drift car.

Posts: 6,775

Admins please help! New user not getting emails


Hey up admin/mod gods

My mate has tried joining the forum twice now. He's not received a confirmation email either time inspite of trying different email addresses.

can someone help please. He tried joining with the forum name Dudleyy

Let's block ads! (Why?)



Admins please help! New user not getting emails

Libellés :

Nut and bolt rebuild

Nut and bolt rebuild


Got me a black Trophy and decided the best way to get it how I would like it is to have it stripped down to body shell, repaint and rebuild with new and reconditioned parts. Once complete it will last me through retirement and for as long as I will be able to drive

The work was started a couple of weeks ago and should be complete by May 2017.

Tried to add pics via attachment, but can't seem to do it these days... Hey ho.


Last edited by Mr Natural; Today at 16:37.

Let's block ads! (Why?)



Nut and bolt rebuild

Libellés :

SAIC MG-Roewe registrations nearly doubled

Before someone made another negative thread (like “Matthew Cheyne is now one year older than in 2015” or "MG sales dropped this Monday") I will make a new positive. I’ve took 3 biggest markets: China, UK & Thailand by separate brands in 11 months period (2016 vs 2015):
UK MG – registrations increased by 33%
Thailand MG – registrations increased by 154%
China MG – registrations increased by 20%
China Roewe - registrations increased by 135%

These 3 markets sold 285.797 MGs and Roewe’s in 2016 11 months, so it’s a massive 88% increase comparing with the same period in 2015 (152.256). The more cars they will sell globally - the more investments they can make, new cars and engines develop.

How many negative comments i can get, especially from Tata Indica (sorry, City Rover) owners?

Let's block ads! (Why?)



SAIC MG-Roewe registrations nearly doubled

Libellés :

QED Banded Liners

The only comments I read say to use ductile liners rather than banded liners if you're building for higher outputs / engine speeds.

But has anyone here actually used or seen banded liners in use. Were they any good? Why did you choose them rather than ductile liners?

Let's block ads! (Why?)



QED Banded Liners

Libellés :

MAF unplugged/diode fitted or replaced

Hello Peeps,
Hope you all had a good crimbo.

Been doing a bit of reading but not found a difinitive answer yet.
Could someone tell me he following with any degree of certainty?

If i bridge the pins on the MA with a paperclip or a diode(IN1448) allegedly across pins 4+5 is this with the maf plugged in?
Or you leave Maf plug off but with this diode in place across the plug?

Read another thread, where some nice chap shared his diagram for a Mafam, but he said that the diode across pins 4+5 worked better than the Mafam.

Going to try unplugging the MAF 1st, followed by cleaning it, then going to try the diode Bodge and finally will try buying one of these.
FOR ROVER MGZT 2.0 CDTI 135 DIESEL (2002-05) MAF MASS AIR FLOW SENSOR METER AFM

At this sort of price you could include it in a yearly service if your lavish

Has anyone got a pic of a Maf plug, with diode in situ? ta

Let's block ads! (Why?)



MAF unplugged/diode fitted or replaced

Libellés :

lundi 26 décembre 2016

Interior lights not switching

Interior lights not switching


My footwell and mirror lights are not switching with either passenger or drivers door.
Mirror lights work by the mirror switches, so fuses seem OK.
Two faulty door switches? Possible I guess. BTW, where are the door switches?

Anyone got any ideas?

cheers Derek

Let's block ads! (Why?)



Interior lights not switching

Libellés :

Highline TV / Sat nav digi antenna aerial

Highline TV / Sat nav digi antenna aerial


Hi,
Just wired in a digi box in my boot. It comes with a antenna and a menu option to have it powered / un-powered. My signal is poor so I have a question. With the old analogue analogue aerial it is the rear demister element, can I try this? My digi box gas a power antenna option. I guess I should turn this off. As you look at the boot from the rear the right hand side box has two aerial connections. Which is the radio and which is the TV aerial?
Can anyone advise?

Thanks,

James

Let's block ads! (Why?)



Highline TV / Sat nav digi antenna aerial

Libellés :

K4 Inlet Air Temperature Sensor Location

K4 Inlet Air Temperature Sensor Location


Recently had the mk2 ZS120 on the ECU scanner - unfortunately it found three faults:

P0444 Control purge valve open circuit
P1539 A/C evaporator temporature sensor fault
P0111 Intake air temperature sensor circuit

The first two i'm going to leave for a while. I have bought a temperature sensor but I can't for the life of me see where it goes! I've searched from the airbox to the throttlebody to the plenum - nothing. I read that it was moved to the air inlet on cyclinder 4 and whilst I can see a port where it might be there's no sensor or wiring loom. The port must be blanked.

Does anyone know there is it? Does anyone know if it was deleted? I'd imagine this is the same for all later K4s on all models so please feel free to move this thread if appropriate.

Many thanks all!

David

Let's block ads! (Why?)



K4 Inlet Air Temperature Sensor Location

Libellés :

Hopefully

[unable to retrieve full-text content]

Hopefully pick it up tomorrow Image: http://ift.tt/2i7fv7O (http://ift.tt/2hYKqoZ)

Hopefully

Libellés :

Rover 75 good brakes

Rover 75 good brakes


Just had a real close call whilst driving my 75 and reminded me of what a great car these things are !!
As the wife and I were on our way to the airport going through an intersection which we had the green light,a peanut driving a tray back utility comes through a red light at speed on our left.I managed to swerve left so we just clipped the rear part of the tray back (basically his tray ran across my bonnet) leaving a large crease in the bonnet ,cracked grille and dented drivers wing!!
As the wife says, could have been alot worse !!.
The drivers ute wobbled around for a second and then just kept going!!
The thing I would have to say,thank god for the Rovers brilliant brakes otherwise it would have been a T bone and my wife or myself would probably not be here !!.
Reported it to the local coppers as a hit and run but it happened so quick didnt even see the driver !!

Let's block ads! (Why?)



Rover 75 good brakes

Libellés :

dimanche 25 décembre 2016

mgzt or 75 towbar plus canbus doofrey

[unable to retrieve full-text content]

After the above pls, led to believe the saloon one will fit a tourer if its a fixed type and not a removable one. Or if its a witter one? Ideally Lancs pls ta Merry Crimbo everyone

mgzt or 75 towbar plus canbus doofrey

Libellés :

Rough idle...?

TPS is a easy and free first thing to do, but I am thinking that maybe when the downpipe was changed, possibly the lambda sensor, or wiring may have been damaged. This would explain why the engine is misbehaving since you replaced the downpipe. It would be where I would be looking first. second would be the Idle air control valve.
I did have a similar fault on my car, but it disappeared after a day and has not come back, although I have serviced the engine and replaced the plugs since.
I also picked up a spare IACV from our sponsor the other day, just in case as they can act up when dirty.
Get a plug in diagnosis, it may help to narrow it down a bit!

Sundance

Let's block ads! (Why?)



Rough idle...?

Libellés :

samedi 24 décembre 2016

Happy Christmas to everyone with an MG Rover!

Think before you type!

 
IanMc's Avatar
 

Join Date: Jun 2009

Location: Braintree, Essex

Car: Flame Red '95 MGF, 64 Suzuki Swift SZ-L, 13 VX Astra, 07 C1 & 59 Fiesta.

Posts: 4,323

Happy Christmas to everyone with an MG Rover!


Happy Christmas to you all - I hope you have a wonderful time.


For .org forum only search results in Google, add "site:mg-rover.org" after your search criteria

Treat others as you would like to be treated yourself.

Let's block ads! (Why?)



Happy Christmas to everyone with an MG Rover!

Libellés :

Another opportunity . 220 Coupe

the guy with the Rover 25 I want to buy is taking for ever to get the MOT on it, which means I've been looking at other models. I really like the 220 coupe with the 2 litre normally aspirated engine - I understand it gives fewer problems than the turbo ...
10/1995. Had 4 owners but only 85000kms. Nice green, but need to visit it at a garage where it's had some work done including the HGF. Seems promising
Buying a Rover is hard work!!

Let's block ads! (Why?)



Another opportunity . 220 Coupe

Libellés :

mg ZR help

[unable to retrieve full-text content]

hi all i got a 2005 mgzr i drove it 100 yards and it started bogging out then a crunching noies and now it wint start i just get a clicking noies when i try to start it up any help plz

mg ZR help

Libellés :

Identifying Hardtop Colour

post #1 of 1 (permalink) Old Today, 14:46 Thread Starter

Registered User

 

Join Date: Aug 2016

Location: Vale of Glamorgan

Car: MG TF 160

Posts: 12

QuestionIdentifying Hardtop Colour

Not sure if this is the right place, but could someone help me identify the colour on this hardtop? I'm looking into buying a hardtop but I need one that matches the solar red of my TF. I messaged the seller and he said it is from an 03 reg TF, and it looks like solar red, but I wanted to get the opinion of someone more experienced than myself.

Droidekafan is online now  

Let's block ads! (Why?)



Identifying Hardtop Colour

Libellés :