Mg zr van mot pass

post #1 of 2 (permalink) Old Today, 22:50 Thread Starter

Registered User

 

Join Date: Nov 2006

Car: Mg zr van /zt diesel facelift morris minor horsham sussex

Posts: 258

Mg zr van mot pass

---

I have had my van in for mot, I had been sat on my drive since February as I needed to change the driveshafts
Motel it today passed with a few minor issues
I have a Renault kangoo van that is a couple of years old (replacement for zr)
And it's decided to break up its injector pump to the tune of 1800 to rectify
Love the MG

unimatrix1066 is offline  

Let's block ads! (Why?)

Mg zr van mot pass

Camshaft cover gasket ok to refit?

[unable to retrieve full-text content]

do you have to use a new Camshaft cover gasket each time you remove the camshaft cover? or is it ok to reuse the existing gasket thanks

Camshaft cover gasket ok to refit?

Webasto and heated seats

[unable to retrieve full-text content]

Are Webasto and heated seats standard equipment on all '04 diesel Rover 75's which have been sold in Europe?

Webasto and heated seats

Blower motor

[unable to retrieve full-text content]

Looking for a heater blower motor for a 1996 rover metro. Any ideas?

Blower motor

How to replace the key case for Rover 75

post #1 of 1 (permalink) Old Today, 16:01 Thread Starter

Registered User

 

Join Date: Nov 2016

Car: CityRover

Posts: 1

How to replace the key case for Rover 75

---

Dear all,

I have newly bought a wonderful carefully used Rover 75 from 2004. While buying I got the old key and the new case, to change the case myself. I have managed to change the case and the circuit board, all is working. But how do I transfer the key itself? Very thankful for any insights into this.

With kind regards,

Caroline from Sweden

carolinerover75 is offline  

Let's block ads! (Why?)

How to replace the key case for Rover 75

Auto diagnostic tool ... witch to choose

Auto diagnostic tool ... witch to choose

---

I want to buy a car fault code diagnostic tool on EBAY or ALIEXPRESS ( a very cheap one) to read and erase engine CODE errors, that read live data from the engine, O2 sensor, etc . Witch you recommend me(no more then 15-30$)????

P.S. Iven if it's is said that rover 25, year 2000 is pre OBDII, i managed to read error codes with LAUNCH X431 wich is an OBDII scanner(i understood that some rover cars had installed OBDII jack ..or something like that...)

Let's block ads! (Why?)

Auto diagnostic tool ... witch to choose

Rear heated window connector

Rear heated window connector

---

Hi, can anyone help, one of my rear heated window spade connectors and the bridge it's attached to is missing on the hardtop, has anyone got an idea as yo where I can get one please?
Thanks
Mark
mark107@hotmail.co.uk

Let's block ads! (Why?)

Rear heated window connector

MAF and Digimafam ...result

MAF and Digimafam ...result

---

I have an 04 streetwise diesel and had been loosing power so I claened my MAF ...not a good idea ( I did use the proper stuff) so I bought a Digimafam from darkice designs ...what a difference ..I could accelerate up hills on the motorway rather than go backwoods ..I was very pleased.
Last week I was out in the floods and sucked up water ( my air filter got waterlogged )so I went and got a secondhand bosch maf from the bay and fitted that ...unbelievable , the car goes like a rocket and pulls better too...

Just relaying my experience of the Digimafam and recomending it after my experience

Let's block ads! (Why?)

MAF and Digimafam ...result

Hood down

[unable to retrieve full-text content]

So who has been out in there t-shirt and shorts with the roof down

Hood down

Two MG dealers win at the prestigious Car Dealer Magazine Awards.

Two MG dealers win at the prestigious Car Dealer Magazine Awards.

Two dealers from MG’s national franchise network have been recognised for their service and sales excellence at the prestigious Car Dealer Magazine Awards. Taking place at The Brewery in London on 28 November, the highly-acclaimed event is the highlight of the used car calendar.

Brecon Motors, which has been serving the motorists of Wales since the early 1900s, received nominations for the Service & Repair Outlet and Used Car Sales Team categories. Adding to the celebrations, John Stuart & Warrington MG received a nomination for the Used Car Award 2016 (dealership with more than 100 cars).

All three categories are set to be hotly contested, with leading car dealerships from across the UK vying to take home the sought-after titles.

Jonathan Williams, Managing Director at Brecon Motors, commented: “It’s a real privilege to be nominated for two categories in the Car Dealer Awards. As a showcase of the UK’s best used car dealerships, we’re thrilled to have received these nominations as a representative of the MG brand.”

James Drinkwater, General Manager at John Stuart & Warrington MG, commented: “As a family-owned business, we pride ourselves on delivering expert advice, a friendly welcome and the best possible customer service from start to finish. Being recognised in the Car Dealer Awards is not only testament to our hard work, but also the dedication and commitment of each member of staff.”

Matthew Cheyne, Head of Sales & Marketing at MG Motor UK, added: “Having two dealers nominated in the Car Dealer Awards is a huge achievement. Both Brecon Motors and John Stuart & Warrington MG should be incredibly proud of their accomplishments. Everyone here at Longbridge will have their fingers crossed on 28 November!”

To learn more about the Car Dealer Magazine awards, and the full list of categories, visit the official website here. To discover more about MG Motor UK’s latest models and finance offerings,

Let's block ads! (Why?)

Two MG dealers win at the prestigious Car Dealer Magazine Awards.

Chris Knott's current Top 20 clubs and forums

As the year draws to a close, here are Chris Knott's Top 10 and Top 20 club/forum rankings for 2016 as they currently stand. Though of course there are still a few weeks of 2016 left and all could change!!

Remember, to feature in our Top 20 a club/forum will be producing a high number of quote enquiries AND Chris Knott will be converting a strong percentage into policies.

There's a good argument that if you drive one of the cars on the list you're more likely to save money on your STANDARD/MODIFIED/MULTI-CAR insurance when you ask Chris Knott to quote, based on recent past performance.

Chris Knott's Top 20 so far for 2016:

1. Volvo Owners Club
2. Alfa Romeo Owners Club
3. Briskoda
4. Saab Owners Club GB
5. BabyBMW .net
6. Mercedes Owner
7. Z4 Forum
8. Audi-Sport .net
9. CivInfo
10. BMW 5 Owners Club

11. Vectra C/Signum Owners Club
12. MPS Owners Club
13. Fiesta ST Owners Club
14. Kia Owners Club
15. GT86/BRZ Owners Club
16. BimmerForums
17. TT Forum
18. VWAudi Forum
19. AlfaOwner .com
20. Hyundai Coupe Owners Club

Regardless of whether you're on the list, we'd like to thank you if you've asked us to quote - we don't take the regular and steady stream of enquiries from club members for granted.

If you haven't yet tried us for a quote on your pride and joy please give us a go at the next renewal - we'd love to look after more members from this forum.

Quoteline: 0800 917 2274 - please mention your club/forum to receive the full benefit of the scheme.

Online: http://ift.tt/1CHbNbZ - complete brief contact details and we'll call you back.

best,
Nick

PS. Next week I'll be revealing the winner of the Chris Knott Autumn Prize Draw. One lucky car enthusiast will WIN a pair of VIP tickets to the Performance Car Show at the NEC on Saturday 14th January with all sorts of privileged access and exclusive features.

***********************
TESTIMONIALS
Five examples of recent feedback from car enthusiasts across a range of clubs and forums:

"Chris Knott Insurance all set up and running. Many Thanks." thepaws4, Mazda6 Owners Club

"It was a simple process when I switched to using them this year. They said they would beat my current renewal price by 10%. The way this was offered to me felt like it was their standard M.O." om613, Mercedes-Benz Owner Forum

"I have both my cars insured through Chris Knott ... Highly recommend them " chris2982, HondaKarma

"What is more impressive than great 'new customer deals' is decent renewals that compete with other 'new customer' deals... This year the renewal was good and could not be matched even with 'new customer offers' by competitors...we renewed again :0)." Dennis, Focus ST Owners Club

"They were the cheapest for me in Southampton city centre." Darkangelv2, Z4 Forum

Let's block ads! (Why?)

Chris Knott's current Top 20 clubs and forums

How to improve Rover 75 Sound System

How to improve Rover 75 Sound System

---

Hi there, I have a 2010 Rover 75 of which the sound system I don't like, so I am thinking about replacing it. One of my friends recommend me to replace it with and aftermarket system like the Seicane S018726W. Anyone has done this before? How hard it is to do this? If anyone can offer me some assistance, I will be very grateful. Lucas

Let's block ads! (Why?)

How to improve Rover 75 Sound System

Hi, My Name is Lucas

[unable to retrieve full-text content]

Hi, My Name is Lucas, really like this forum and want to learn more about MG Rover, very happy with it, thanks. :smile:

Hi, My Name is Lucas

Protip for changing your cambelt

Protip for changing your cambelt

---

I've had this recommended to me by a mechanic and it's one of those "do at your own idiotic risk" but it's perfectly sane and safe if done correctly.

If you haven't got a cam locking tool what you do is simply cut your old cambelt down the middle essentially slicing it into two equal pieces. rotating the knife along the middle of the belt.

This is assuming you can rotate the cams freely so ungear that sucker first.

Then simply loosen the tensioner, slide your new belt into place using the old one as a guide.

Now comes the careful bit. You then simply cut away from the new belt into the old one and peel it off. The new belt should now be half in place and just needs to be pushed onto the cams fully.

No locking tool required, not panic over whether the cams are out of alignment.

Tighten up the tensioner and you're done.

Let's block ads! (Why?)

Protip for changing your cambelt

Engine mount compatibility

Engine mount compatibility

---

Hi guys.

Can you help me to try to find out if the LR Freelander KKB102480 engine mount is compatible with the one for Rover 25 / MG ZR with the following PN KKB000421?

I have to replace ASAP this engine mount in my MG ZR and hey seem to be the same by photos.

I am about to try the LR engine mount as it is way too cheaper than the MG-Rover ones.

Did anybody try this previously?

Btw, I took some measures of my failed MG-R engine mount (not very precise though), so if anyone of you has a spare LR engine mount and doesn't mind of measure it to see if it matches, I would be very thankful.

Let's block ads! (Why?)

Engine mount compatibility

Wiring

I hope someone can help. The central locking is not working on my TF. The door switches are all working and the relays are working in the Pektron scu, but someone has cit the orange wire and the pink wire in the connector block (663) does anyone know what these two wire do?. I have tried reconnecting them with no success.
I have tested the pink and I get continuity with earth is this correct? The orange I don't know. Please help
Thanks Kevin

Let's block ads! (Why?)

Wiring

Black 11 spoke 16" alloy with Eagle F1 Tyre

Supporter

 

 

Join Date: May 2007

Car: MGTF Cool Blue S.E. (LE500 Black Spec) Mercedes 230 SLK, Volvo C70 Cabrio

Posts: 4,507

Black 11 spoke 16" alloy with Eagle F1 Tyre

---

I have for sale an MGF/MGTF Black 11 spoke 16" alloy with an as new Goodyear Eagle F1 195/45/16 tyre. £80

Let's block ads! (Why?)

Black 11 spoke 16" alloy with Eagle F1 Tyre

Black Tonneau Cover

[unable to retrieve full-text content]

I have a black Tonneau cover for a MGF or MGTF in good condition. £40 + £5 postage.

Black Tonneau Cover

Engine rebuild

I am in the middle of stripping down the original engine that came with my scrapyard car as my early winter project and I have some questions.

The liners seem to be level with the block and, as far as I can tell, each other (I plan to recheck). Am I better to fit shims to the bottom of the liners and use the MLS gasket or stick with the updated MG rover elastomer gasket? If I fit shims, I will need to take the pistons out and that means disturbing the shells, the crank etc. I'm prepared to do all that but I would appreciate some advice. The head looks to be level according to my straight edge and feeler gauge. It looks like the elastomer gasket, that was in place, failed.

If I take the pistons out, do I need to replace the bolts at the crank or am I able to re-use these?

The engine oil was fairly manky. Should I replace the bottom rail or is it possible to clean it and re-use? I'm about to take the sump off today and don't yet know which version of the rail is hiding there. If it's the older one, I plan to replace it anyway.

Lastly, what are the current arrangements for tightening head bolts? I saw somewhere a figure in nm (that I can't find right now for some reason) followed by 180 and a 2nd 180 turn? I thought it was 90 turns and a higher torque setting. So I'd appreciate latest advice.

Let's block ads! (Why?)

Engine rebuild

Getting into bonnet from outside

Getting into bonnet from outside

---

Hi All,

So I just bought this MG ZR. The battery has gone flat with the cold weather (I think the alternator needs replacing), the car is locked and key isn't going into the lock on the driver's door. I was locking it and unlocking it using the remote and hadn't actually tried the keys in the lock, though they both work in the petrol cap and ignition. It's definitely not just a case of an iced up lock. So how can I release the bonnet from the outside to hook some jump leads up and re-power the car so I can open it ?

Any help would be gratefully received !

Dave.

Let's block ads! (Why?)

Getting into bonnet from outside

Guess the MG UK registrations for November 2016

Registered User

 

Join Date: May 2007

Location: Warwickshire

Car: Rover 75 CDT, Metro 116,MGF VVC,Mrs JoCoLo's Panda 1.2 and Mstr JoCoLo's TF 115

Posts: 2,239

Guess the MG UK registrations for November 2016

---

Well after a big September and an average October who would like to start the ball rolling?

I will close this at 10pm on Sunday 4th December. I expect results to be in 6th December.

Let's block ads! (Why?)

Guess the MG UK registrations for November 2016

Anyone dare to ...

[unable to retrieve full-text content]

List All the mods up to now? Big, small, interior, mechanical... Everything you can think of.

Anyone dare to ...

Can't engage driveshaft with hub splines

Hi,

I set about changing a torn C.V. boot, drivers side boot at hub, 1.4 K 45 2005.

My approach was release the lower arm balljoint and nothing else.

Now upon reassembly I find that I just can't get the driveshaft splines to engage with those of the hub.

Am I going to have to take the hub off the upper mount and the tie-rod to get it onto the shaft?

There must be some trick to it.

One other thing that worried me. I am using the manual from my old 400, which describes a stop ring and a circlip. Upon dissassembly, there was no stop ring. Is that right for 2005?

Any help much appreciated.

Let's block ads! (Why?)

Can't engage driveshaft with hub splines

Door strip decals

Two questions here.

1. On a silver 25, what colour should the background be behind the "25" decal on the front door protector strips? On mine the drivers side one is silver, but on the passenger side it is black. I am guessing that either one has faded or the other one has darkened somehow.

2. How do I fix the one that is the incorrect colour? Is it just a sticker or is the protector strip sprayed in that colour?

I bought my Rover 25 back in September, and I am just getting round to sorting these jobs out.

Let's block ads! (Why?)

Door strip decals

New MG3 owner with a reversing issue!

Registered User

 

Join Date: Feb 2011

Location: Bristol

Car: MGF Trophy 160 - Trophy Blue

Posts: 53

New MG3 owner with a reversing issue!

---

Hi guys!

Has been some time since I've been on this forum due to letting my MGF Trophy 160 go a couple of years ago.

I decided to jump back into MG ownership with a brand new MG3 in October.

Pretty pleased with it up until a couple of weeks ago when the engine just decided to cut out when reversing. Initially, I thought it was my error first time it occurred with it being a new car. Has since happened another 5 times over the past week.

It's not as though it has stalled, if anything it's more like the energy saving feature kicks in and the engine starts again once I put my foot on the clutch. It also doesn't happen everytime. Some days it doesn't happen at all when reversing. Really odd!

I've now booked into a main dealer in Bristol to be checked over next week but just intrigued to see if anyone else has experienced anything similar as dealers appeared baffled when I explained it to them.

Any info/suggestions would be fab!

Thanks guys!

Krissy

---

Last edited by krissye86; Today at 16:01.

Let's block ads! (Why?)

New MG3 owner with a reversing issue!

50% Discount on Oil, incl. for MG3 with stop/start

50% Discount on Oil, incl. for MG3 with stop/start

---

Just a quick heads-up: Eurocarparts have a 50% off offer on all oils this weekend (enter code OIL50); includes free delivery. I've just bagged the following, which is suitable for the latest 2016 MG3 with stop/start:

http://ift.tt/2ggeaKS

HTH
Brian
(ps no connections etc etc).

Let's block ads! (Why?)

50% Discount on Oil, incl. for MG3 with stop/start

New Rover 75 Owner In Cornwall

New Rover 75 Owner In Cornwall

---

Hi All! I'm a new Rover 75 owner from deepest, darkest Cornwall. I love the car but need to get new rear suspension arms for it and would be really grateful to anyone wanting to sell me a pair. It is a Rover 75 1.8 T Connoisseur. Loving the ride, just need parts!

Let's block ads! (Why?)

New Rover 75 Owner In Cornwall

Pictures from the summer

Pictures from the summer

---

Long time since I was active on here, summer is over and the old Rover is now garaged till next spring. So a few recent pictures.

---

Last edited by Vitesse; Today at 11:32.

Let's block ads! (Why?)

Pictures from the summer

Daylight change

post #1 of 1 (permalink) Old Today, 11:24 Thread Starter

Registered User

 

Join Date: Oct 2011

Car: Rover 25

Posts: 66

Daylight change

---

alex_orastie is online now  

Let's block ads! (Why?)

Daylight change

fuel pump sender refit help

fuel pump sender refit help

---

Hi guys.

I followed the guide to replacing the intank pump on my diesel but I cannot figure out how to get the sender arm back in.

1)Should the square part sit in the floating tray?
2)should the arm be pointing towards or away from the door?
3)should the spring on the arm be touching the roof or the floor of the tank?

Let's block ads! (Why?)

fuel pump sender refit help

Air filter mod

Air filter mod

---

Anyone changed/upgraded their air filter? Checking some out on eBay (slow day at work yesterday!), the induction kits range in price and some have a tube coming from the induction pipe? Any ideas what it is for?
Thanks!

Let's block ads! (Why?)

Air filter mod

Help:rubber sleeve on the sub-frame for MG-ZT

Help:rubber sleeve on the sub-frame for MG-ZT

---

Hello guys, does anyone knows that whether the rubber sleeve on the sub-frame for MG-ZT are using the same spare parts for BMW E46 or E39? can I use it to replace my broken MG-ZT's rubber sleeve?

Let's block ads! (Why?)

Help:rubber sleeve on the sub-frame for MG-ZT

Which wire disables deadlock?

Which wire disables deadlock?

---

I've slowly been sorting my 25 now that I have had my SCU back from Technozen, who worked his magic on it

The latest issue is that both front doors locks have been unplugged. I am thinking that they had a deadlock issue in the past, as there is lots of damage to the area around the passenger door catch. Possibly from smashing out the old lock.

I saw somewhere that some one said a wire can be cut to disable the deadlock motor, but I don't remember which.
Can anyone point me in the right direction? It's a Mk2 with a Pectron SCU.
Thanks.

Let's block ads! (Why?)

Which wire disables deadlock?

Streetwise shock absorbers

Hi everyone,

Streetwise shock absorbers seem to be unavailable (at least hard to get). I wonder if/how do they differ from the Rover 25 ones? Can I safely combine the Streetwise springs (40 mm longer) with R25 dampers? Maybe somebody did it already and could share the experience?

cheers!

Let's block ads! (Why?)

Streetwise shock absorbers

Alfa Giulietta anyone??

Took my beloved to choose a radiator last weekend, came back with an Alfa. Don't worry team, still got the TF, traded the Punto for it.
I presume this is what they mean by 'impulse buy'.
Anyhow- anyone got/had one? Common problems? It's the 2.0 diesel (140 horse version).
Been on the Alfa forums, not much in the way of hands on how-to's like here. Diesel looks like a complete arse to service, oil filter buried under the engine.
Also, seems like the DPF is as welcome as a fart in a spacesuit.

Oh, it does go fast!. Making me wonder what a good TF 160 would feel like.
Cheers!

Let's block ads! (Why?)

Alfa Giulietta anyone??

MGR Locking wheel nut key

Supporter

 

 

Join Date: May 2007

Car: MGTF Cool Blue S.E. (LE500 Black Spec)

Posts: 4,505

MGR Locking wheel nut key

---

MGR locking wheel nut key no.57. in New Condition.

The could be very handy if you have lost or damaged yours!

£20 including delivery.

Let's block ads! (Why?)

MGR Locking wheel nut key

52mm Throttle bodies

[unable to retrieve full-text content]

For those who dont venture out of this section, I have some 52mm throttle bodies in the for sale section, PRICE NOW REDUCED! Also other TF bits. Thanks.

52mm Throttle bodies

Free stuff for Rover / MG; collection from West Sussex

Registered User

 

Join Date: Feb 2008

Location: Near Brands

Car: MG ZS 120+ & Suzuki TL-1000R

Posts: 1,619

Free stuff for Rover / MG; collection from West Sussex

---

Not sure if free stuff qualifies as selling or not - apologies mods if I'm breaking any rules.

Not been on the forum for a long while, as I sold my ZS nearly a year ago. I've had a clear out of my garage stuff today, and I have some stuff left over from my ZS and 420 GDSi.

I don't want anything for them; if there's no takers it's going in the bin anyway but I'd rather forum members can make use of them if possible. The only catch is you have to collect from West Sussex (Crawley / Horsham areas) and it's first come, first served.

I have:

1) Un-opened 5L container of Halfords 10W-40 semi-synth engine oil to suit K series petrol engines. It has some notes written on the bottle from my old car but otherwise as new.

2) Approx. 2L of MTF-94 transmission oil. The container is open but the oil's clean. Suits the PG1 gearboxes.

3) 2 x Halfords oil filters HOF 231. I believe this fits the L series diesel cars but please check this yourself.

Hope everyone's keeping well

WS

Let's block ads! (Why?)

Free stuff for Rover / MG; collection from West Sussex

Sump cover gasket

Registered User

 

Join Date: Oct 2011

Location: Ontario, Canada

Car: MGF

Posts: 328

Sump cover gasket

---

Since I bought my F it has been dripping oil from the sump cover. I discovered when installing the uprated oil rail that on the block, that most of the threaded holes that the sump bolts thread into had been stripped. I repaired the threads using helicoids but I buggered one on the front side of the engine. I used the correct anaerobic sealant on the sump.
This past summer the sump started leaking again, leaving a lovely little puddle of oil directly below the one sump screw that doesn’t tighten; the one I buggered.
This winter I am going to try to fix that buggered thread but I was wondering if the oil sump gasket, part # LVF100290, used on the Rover200/25/ 400/45/MG ZR/ZS can be used on the MGF’s sump cover? According to Rimmer, the Rover200/25/ 400/45/MG ZR/ZS use the same block at the MGF and TF, so I would think that the gasket would work/fit. Has anyone used the oil sump gasket on an MGF’s k-series engine?

Let's block ads! (Why?)

Sump cover gasket

MG dealership is celebrating after being nominated for a prestigious Car Dealer Award

MG dealership is celebrating after being nominated for a prestigious Car Dealer Award

---

A family-owned dealership is celebrating after being nominated for a prestigious Car Dealer Magazine award. John Stuart & Warrington MG, which is based on Offord Lane, Warrington, has reached the final of the Used Car Award 2016, for a used car dealership with over 100 cars.

The awards ceremony, which will be held in London on 28 November, is the highlight of the used car calendar and celebrates excellent dealerships nationwide. Sponsored by motor finance specialist Black Horse, the Used Car Dealership of the Year award is set to be hotly contested, with six dealers vying for the prize.

John Stuart & Warrington MG has a reputation built on excellent customer service and aftersales provisions. Established in 2007, the business provides motorists in Warrington and Cheshire with the chance to get behind the wheel of some of MG’s latest models, including the all-new MG GS SUV and stylish MG3 supermini.

James Drinkwater, general manager at John Stuart & Warrington MG, commented: “We’re absolutely delighted to be nominated for a Car Dealer Magazine award. These accolades showcase some of the UK’s best used car dealerships, so it’s fantastic to be receive a nomination.”

Matthew Cheyne, Head of Sales & Marketing at MG Motor UK, added: “John Stuart & Warington MG has been a shining light in our UK dealer network since they joined, so it’s fantastic to see them recognised at a national level. The whole team have done an incredible job in raising awareness of the MG brand throughout Warrington and Cheshire, and everyone here at Longbridge will have their fingers crossed for them on 28 November!”

Let's block ads! (Why?)

MG dealership is celebrating after being nominated for a prestigious Car Dealer Award

Beware Car Insurance Cover on new cars......

Beware Car Insurance Cover on new cars......

Hi all,
I've just taken delivery of a new MG3
As a consequence, I've been looking at the small print on my AA car insurance policy, in conjunction with Gap Insurance policies. I did think that, in the event of a write-off or loss (theft) in the first year (actually 13 months with the AA) then the AA would replace the vehicle on a like-for-like new for old, so long as the repair costs 60% or more of the new car list price. Until I found this, purely by chance:

http://ift.tt/2go9rqU

- at which point I read the small print on my AA policy again. And strangely they don't make clear at what point (with respect to market value) they declare a car to be a write-off.

Basically, it is possible for your new car to be declared a write-off, yet still not qualify for the "new for old" clause. It could leave you very out of pocket. I've emailed the AA to seek written confirmation of their "write-off" policy.......

The bottom line is that it could be (probably is) very wise to start a Gap Insurance policy from Day One, rather than defer it for 12 months in the belief that the standard Car Insurance Policy will provide full cover in the first year.
HTH
Brian

Let's block ads! (Why?)

Beware Car Insurance Cover on new cars......

Help with my buying mg tf

Help with my buying mg tf

---

Hi All,

I am looking into buying an MG TF. I saw a guide somewhere and followed it (will give link later). According to the guide there is only one bad point I.e corrosion on part of subframe. The clutch, engine condition is fine.

The real issue I see is that the heater on full or medium or low blast in all three settings was cycling between hot and cold air. Is this something to worry about? I think it's the thermostat because the head gasket was changed not long ago. There is no mixture in the coolant or the oil. On cold setting it kept the air cool so the seller thinks it is cycling on the hot setting to regulate the temperature inside the cabin, can this be true?

He didn't let me drive the car due to insurance but took me for a drive and I'm in love with the car. Any advice appreciated.

Thanks.

Let's block ads! (Why?)

Help with my buying mg tf

MG I6 and E6

So do we think the Roewe E6 and I6 will become the new MG 6 for the UK?

Given that one comes with a 1.0 turbo and electric motor producing a total of over 200bop and the other with 170bhp 1.5 turbo surely that would sell better than the 6 did especially a hybrid vehicle.

I can see this being a good move for the UK, in theory if would also tie up with the BTCC announcement that they would be developing a refreshed 6 within the next 3 years at the start of the new 3 year deal with 888.

We can hope of course I have no knowledge saying this will happen, just in my opinion should happen.

Let's block ads! (Why?)

MG I6 and E6

Recommended code reader for 2004 MG ZS

[unable to retrieve full-text content]

What sort of code reader are you guys using and any recommended models? Thanks

Recommended code reader for 2004 MG ZS

Respray cost

post #1 of 1 (permalink) Old Today, 19:34 Thread Starter

Registered User

 

Join Date: Jun 2015

Car: MG ZR

Posts: 82

Respray cost

---

Does anyone know a rough price to respray my ZR the same colour?

I have a small rush patch on the wheel arch, stone chips on bonnet and also a big scrap on the front bumper

Daniel Owens is online now  

Let's block ads! (Why?)

Respray cost

EGR OR EGR Vacuum Regulator ...FAULTY ???

EGR OR EGR Vacuum Regulator ...FAULTY ???

---

Engine does not go round interrupts, almost stops smoking area hard ... EGR VACUUM REGULATOR make a strange noise, like a "taca taca taca" ... and when putting out The vacuum betwen EGR VACUUM REGULATOR and EGR engine recovers and works perfectly.

2 weeks ago i dismantled EGR and I cleaned with a solution for carburetors, I installed and worked perfectly so far! EGR is faulty or EGR VACUUM REGULATOR?

What solutions do I have in this case?

If you go with The vacuum out, like in pics, what happens?

NEED HELP MY FRIENDS!!!

Let's block ads! (Why?)

EGR OR EGR Vacuum Regulator ...FAULTY ???

MG Rover Nov 2016

[unable to retrieve full-text content]

I do not advocate trespass, i just share this link, for anyone who would like possibly the very Last MGF to leave the production line.. :) General - - MG Rover - September 2016. | 28DaysLater.co.uk (http://ift.tt/2frZHNq)

MG Rover Nov 2016

Changed timing solenoid - now wont start!

Help! Changed timing solenoid - now wont start!

---

Hi, i changed my timing solenoid on my MG ZS diesel due to it having tractor syndrome.

Now it wont start, tried opening unions to injectors but not a lot of fuel is coming out.

Any ideas please?

---

Last edited by swight; Today at 18:45. Reason: New information

Let's block ads! (Why?)

Changed timing solenoid - now wont start!

ROVER 25, 2.0 IDT ... MAP or EGR problem

ROVER 25, 2.0 IDT ... MAP or EGR problem

---

Engine does not go round interrupts, almost stops smoking area hard ... MAP / EGR hear a strange sound, like a "taca taca taca" ... and when putting out The vacuum betwen MAP and EGR engine recovers and works perfectly.

2 weeks ago i dismantled EGR and I cleaned with a solution for carburetors, I installed and worked perfectly so far! EGR is faulty or MAP?

What solutions do I have in this case?

If you go with The vacuum out, what happens?

NEED HELP MY FRIENDS!!!

Let's block ads! (Why?)

ROVER 25, 2.0 IDT ... MAP or EGR problem

Heated rear windscreen wiring

Registered User

 

Join Date: Sep 2010

Car: Also 2 Healey Sprites

Posts: 10

Heated rear windscreen wiring

---

Does the standard loom have heated rear screen wiring built in? I've found a likely looking bit on near side adjacent to rear screen.
Is the switch wiring in and how do I access the switch panel? I don't want to break anything and the panel doesn't seem to want to move.

Let's block ads! (Why?)

Heated rear windscreen wiring

fitting new clutch cable to a mgzrTD

fitting new clutch cable to a mgzrTD

---

I am just about to fit a new first line clutch cable to my zr TD after haing some serious issues with the useless ones from eurocar parts. i have had a new release arm fitted and clutch but the old cable was knackered is there any proper way of fitting this with out sodding up the new cable ?

Let's block ads! (Why?)

fitting new clutch cable to a mgzrTD

Master brake cylinder

Good day!

Could you please advice, what is the difference between the ABS and non ABS master brake cylinder? Are they interchangeable? Also, is are there differences between rear drum and disk?

Отправлено с моего SM-N9005 через Tapatalk

Let's block ads! (Why?)

Master brake cylinder

Rover 75 v8

Rover 75 v8

---

Got the opportunity maybe of buying a Rover 75 V8 .
As they were never brought over here (only ever got MGZT260s)
It appears to be an import.
Anyone give me a heads up as to how these things go compared to the V6 ie is it worth the extra dollars for the V8 as the rest of the car is identical to the one ive got !!!!

Let's block ads! (Why?)

Rover 75 v8

Throttle cable purchase

Hi everyone!

Can someone please help me- I need to get another throttle cable as the one presently on the car is frayed, with bits sticking out everywhere ( I keep *****ing my fingers as I try to smooth them down!). Decided that a new one is in order but I don't seem to be having much luck finding one! I have found loads of throttle body's on eBay and Google search but no cable. Does anybody know any part numbers or perhaps have one for sale?
For MG ZR 160, 54 plate if there is any difference..... Many thanks
Verity

Let's block ads! (Why?)

Throttle cable purchase

Is this battery clamp correctly fitted?

Is this battery clamp correctly fitted?

---

So found this in the glovebox. When changing the battery I discovered there wasn't a clamp. So thinking the triangle piece on metal was it (in the pic) but can't see how it holds the battery in place. Is there a part missing?

Can anyone advise?

Sent from my iPhone using Tapatalk

---

Last edited by Chris.mas87; Today at 21:32.

Let's block ads! (Why?)

Is this battery clamp correctly fitted?

BP Ultimate vs V-Power mileage

BP Ultimate vs V-Power mileage

---

It seems that all the Sheel station that were at a resonable distance from me, have been closed by a couple of months now, so I'm stuck, mainly, with other brands.

It's the second time I've refuelled at BP with premioul petrol but it's possible to get a nearly 40 miles difference with a full tank using V-Power?
With BP I make around 260 miles in the city, around 300 with V-Power.

Let's block ads! (Why?)

BP Ultimate vs V-Power mileage

Replacement Dial Faces

Hello,

I’m now registered as a trader so can promote my range of plastic replacement dial faces.

I have started with a selection for the TF and will add designs for the MGF if there is enough interest.

They are professionally multi-layer printed onto plastic and cut out with a computer controlled cutter to ensure they fit correctly.

Most of the designs can be backlit if you want to modify your cluster or used with the original front illumination.

Home

You can get £10 discount on the website prices for mg dials by using the code mgforum001 (code expires at the end of December)

I can also do custom designs.

Thanks

Mark

Let's block ads! (Why?)

Replacement Dial Faces

Another light question - warning light on...

Registered User

 

Join Date: Sep 2013

Location: Bristol

Car: 04 75 CDTi 127k, 54 plate. Rover 45 1.6, 88k miles, 54 plate. MGF VVC, 95k miles, '96.

Posts: 842

Another light question - warning light on...

---

My blown bulb warning light is permanently on. I've checked all of the lights, and they're all ok. Any ideas? (One was blown, but was replaced several days ago now).

Will this be an MoT issue if not resolved?

Let's block ads! (Why?)

Another light question - warning light on...

Blue tinted headlamps?

Legal or not? There are various opinions on the interweb, with a common theme seeming to be that there should be no blue lights shown on the front of the vehicle. This morning a lorry coming the other way on the M4 had about 20 of them for decoration!

I bought some cheapo ebay bulbs, but now I'm not sure about fitting them. They're listed as 6000k, and I've read that the limit for white light is about 4200. I see cars with a blue tint to the headlamps every day. So, what's the score???

The ones I've got are rated at 100/90W, so will the wiring and fuses be ok?

No big deal if I can't use them, they were only £5.75 for 4!

Let's block ads! (Why?)

Blue tinted headlamps?

ECU Wiring diagram

post #1 of 1 (permalink) Old Today, 01:05 Thread Starter

Registered User

 

Join Date: Jul 2015

Car: MG ZS

Posts: 289

ECU Wiring diagram

---

Does anyone have a good clear diagram of which connectors run which system on the main ECU for the k-series?

I am going to need to re-jig a few things in due course including the RPM and also send some false signals for the injectors possibly but need to be able to have the functions like central locking etc still working of the 12V source.

Long story short, i'm converting an MG 135 to electric and need to be able to send signals/current to the bits that are not petrol engine related.

I have looked around already but there are limited images available.

The Haynes manual has some of the stuff I need but it's a bit vague.

Stargatemunky is online now  

Let's block ads! (Why?)

ECU Wiring diagram

K Series Cylinder Head

[unable to retrieve full-text content]

Looking for a good second hand cylinder head for my 416 Tourer. Manual Tensioner type. 1997. Chris

K Series Cylinder Head

new member

can anyone help please,mgtf 2003 R3 red relay,last owner had push button put into dash ,as the stering wheel button wasent working,this has now been fixed,but they have bypassed the relay,and installed another,wondering if this would be probabble cause for temp gauge not to work,would be greatful for any help with this ,thank you

Let's block ads! (Why?)

new member

Welcome MSXDials!

[unable to retrieve full-text content]

Hi Everyone, Please take a moment and welcome MSXDials (http://ift.tt/2gbGMre) to the community. Thank you!

Welcome MSXDials!

VX58 LWC Fiat Diesel

VX58 LWC Fiat Diesel

---

I read a post in 2014 about the fiat diesel test car.
I am wondering if this car managed to make it back on to the road as it would be amazing to see a fully working prototype at next POL.
I now have 2 rare MG's 1 Ignition blue MK2 ZS 180 and a MK2 MG ZT in PBT they are both stunners. also in the family my parents now have a bermuda 10 rover 75 in white and an MG ZT 2006 in gun metal grey. it would be nice to have the bermuda 75 on show nexto VX58 LWC to show what might have been and a 75 with special options next to it. I'm also currently looking at a rover 75 LWB there are only 2 of them left.

Let's block ads! (Why?)

VX58 LWC Fiat Diesel

Will this sump washer fit the L-series?

[unable to retrieve full-text content]

Seen this on halfrauds, will it be the correct one? Just says "Rover" Halfords Sump Washer (Rover) HFX226 (http://ift.tt/2geaeL8) Sent from my iPhone using Tapatalk

Will this sump washer fit the L-series?

MG F/TF Amp for door speakers

Hey guys,

Just joined the forum Got my 2004 MG TF in April. So far I've replaced the alternator and head gasket so hopefully it's gonna be ok now! So anyway I fitted a stereo last week, this is what i got...

http://ift.tt/2gvBHe1
http://ift.tt/2gvAaES
http://ift.tt/2gvBEPB

So it sounds pretty good but I was wondering if amping up the head unit will make much of a difference and if so, what would it change? I didn't know if the guy was trying to sell me something i didn't really need - the amp was £100. He said the head unit is "amp ready" so playing with the idea of getting one. Would be awesome if someone could tell me what it would do and any recommendations for an amp that would work well with my setup but would hopefully be less than £100! But if I need to spend that to get the most out of it I will.

Nice one guys

Let's block ads! (Why?)

MG F/TF Amp for door speakers

Another Tyre recommentdation post

Hi Guys,

I have a bit of an issue with my car feeling light/vague and drifting, I did all the initial checks, made sure its running the correct air pressure, etc., then took it for a 4 wheel laser alignment and still it drifts. Interestingly the company that did my alignment specialises in tuning lotus cars for track and they said that I have the wrong tyres which is most likely the problem.

I read up on the tyre specifics of cars and it certainly seems to be the case. I have cheap Maxxis tyres on the front and 2 different types of low budget on the rear. So I understand all the points and that I should stick to the 2/3 "recommended" brands and types, however from what I read these are not that great in the wet. Which is a problem for me.

As my car has a hard top on I intend to use it through most of the winter, but the problem is I travel some distances at times and I need tyres that are not going to see me aquaplaning along a motorway at 65mph or ditch hunting (I live in rural Suffolk) in a little frost, plus have the attributes for not wandering.

So with all that being said can anyone advise on a brand/tyre model that is either winter or all season that would tick all the boxes for the 15" wheels to help improve my handling and be winter safe?

Thanks in advance.

Si

Let's block ads! (Why?)

Another Tyre recommentdation post

MG express on eBay

MG express on eBay

---

To anyone who is interested there is a nice van come up on eBay, I would do a link but don't know how ?.
I had a nose the other day as you do, it's a nice low mileage car and it seems to be in good condition by the pictures. It seems to want a bit of paint but nothing serious. If I hadn't put so much money into mine I would consider it myself, it's blue rather than my starlight silver one so a better colour too, typical lol.
Just thought I'd let everyone know in case anyone here is on the look out. Please note also I have nothing to do with the car, I am just an enthusiast who would like to see someone who would appreciate it get it rather then a cheap run around which will end up scrapped.

Let's block ads! (Why?)

MG express on eBay

Trackday pics!

I've not been on for a while, so yes im still alive, and so is the track car

I thought I would chuck up a few pics from our last few trackdays

(I should point out a couple of months ago somebody nicked the spoiler and front trim off the car, its back to normal now)

Let's block ads! (Why?)

Trackday pics!

Mg zt-t diesel

Hello is the clutch change on the diesel is it as tough a job ,as it was on my zt190
The ztt I was hoping for here in france is coming Fri/sat ,price dropped ,but has lost its clutch, ever the optimist might just need a fluid top up / new master cyl . but wondered about a full clutch change and difficulty.

Thanks ian...

Let's block ads! (Why?)

Mg zt-t diesel

Rover 45 windscreen clips

Rover 45 windscreen clips

---

I had my windscreen replaced, but as you can see in the photos the trims at the top (left and right are not seated properly. The fitter said this is because the clips used were not quite the same as Rover ones.
Obviously I said this was unacceptable, and they have said they will try to get the proper ones.
I don't hold out much hope for them doing this successfully, but I see they are available from Rimmers, £10 for a compelte set for each side.
If i get these, will it be an easy DIY, without damaging the glass or rubber finisher/trim?

Let's block ads! (Why?)

Rover 45 windscreen clips

Zr 1.8 pg1 inner cv boot kit issues

Zr 1.8 pg1 inner cv boot kit issues

---

As said issues with inner cv boot kit I've ordered and now received from rimmerbros 2 x inner cv boot kits for the mg zr 1800 models the part number given for the 18 model was zua000920 but these do not fit at all to small to short and on further looking the same part number is given for the whole petrol zr range as for r25 petrol range the diesel has a different part number
So does anyone know the exact genuine mgroverpart number for the zr 1800 fitted with pg1 box for the inner cv boot kit please?? Thanks

Let's block ads! (Why?)

Zr 1.8 pg1 inner cv boot kit issues

Help finding a VP30 pump timing solenoid

[unable to retrieve full-text content]

Hi, having got tractor syndrome on my 2004 MGZS diesel i need a timing solenoid. Where is the best place to buy one please?

Help finding a VP30 pump timing solenoid

Rear view mirror mounting pad - recommendations please.

Think before you type!

 

 

Join Date: Jun 2009

Location: Braintree, Essex

Car: Flame Red '95 MGF, 64 Suzuki Swift SZ-L, 13 VX Astra, 07 C1 & 59 Fiesta.

Posts: 4,298

Rear view mirror mounting pad - recommendations please.

---

Dear All,

This morning I tried to adjust my rear view mirror and it came off in my hand... The pad the holds the mounting block to the screen has given up.

Can anyone recommend an industrial strength replacement?

I dont want to be doing this repeatedly every few hours, so all help and advice thatn guides me to a strong fix is appreciated.

---

For .org forum only search results in Google, add "site:mg-rover.org" after your search criteria

Treat others as you would like to be treated yourself.

Let's block ads! (Why?)

Rear view mirror mounting pad - recommendations please.

Flat Battery alarm

post #1 of 2 (permalink) Old Today, 12:55 Thread Starter

Registered User

 

Join Date: Jan 2013

Car: MG ZR

Posts: 9

Flat Battery alarm

---

Hi, I've had similar problems before but it seems cold weather brings them on. I only use my 54 ZR about once a week, and during cold periods I have problems with the battery going flat. This is the first time this year that it's happened.

I've got a mobile jump starter battery that I want to use. I can unlock the doors using the key in the door and pop the bonnet but once I connect the charger the alarm goes off. I'm guessing the battery is completely dead. I left it for about 5 minutes charging and it did turn on the electronics inside but it wasn't enough to start the engine. After that the alarm just kept going off, so I gave up so as not to have my neighbours kill me. Is it possible to disconnect the alarm by taking a fuse out so I can do this in silence?

bolozenden is online now  

Let's block ads! (Why?)

Flat Battery alarm

changing metal pipes... need advice

changing metal pipes... need advice

---

hello people i decided to install on my non abs car rover 620 series
abs brake pump unfortunately servo is different,
also brake pipes made of metal are different only one of them,we talk about nissin brake master cylinder,
so i get 1 long pipe made of steel from my hydro clutch,its same diamanter in and out,but its too long do u think it will do the job?
or its bad for braking pipe to be too long?
factory one is like 50cm,this is like at least 100 cm or more.

Let's block ads! (Why?)

changing metal pipes... need advice

Bushings & Rear Wheel Alignment?

Bushings & Rear Wheel Alignment?

---

Hi,

I just replaced the rear suspension upper link arm on both sides, with the equivalent new part for an EK4 Honda Civic Hatch (same part as in Rover 45).

Does doing this upset the rear wheel alignment, or am I ok to leave it?

Thanks

Let's block ads! (Why?)

Bushings & Rear Wheel Alignment?

Should I buy this MGTF?

Rover Lifestyle

 

 

Join Date: Aug 2009

Location: Split, Croatia

Car: Rover 200 (95-99) 'Bubble Shape'

Posts: 10,208

The only thing I noticed is that there a change in colour of driver seat colth. Looks like half of seat is wet and the other half dry. Was it with open roof while it was raining, or there is a leak in the hood?

Let's block ads! (Why?)

Should I buy this MGTF?

Two mods in one!

post #1 of 1 (permalink) Old Today, 14:37 Thread Starter

Supporter

 

 

Join Date: May 2015

Location: Bioule, near Montauban, South West of France

Car: Rover 25 1.4 103bhp 3 d petrol 2002 MNX 41k ml / Fiat Punto roadster 1995 Bertone 1.6 90bhp 78k ml

Posts: 492

Two mods in one!

---

To give a little more bling on my indicators, I changed them with ones with chromium inside and achieve all with polished aluminium frames:

Dorchester is online now  

Let's block ads! (Why?)

Two mods in one!

52mm Throttle bodies For Sale

Supporter

 

 

Join Date: May 2007

Car: MGTF Cool Blue S.E. (LE500 Black Spec)

Posts: 4,499

52mm Throttle bodies For Sale

---

52mm Throttle bodies For Sale

I have a number of used 52mm Alloy Throttle Bodies for sale which include the throttle position sensors.

These were fitted as standard to the MG VVC engines and on the TF135. They are an ideal upgrade to other K series engines that were fitted with smaller throttle bodies that often stick, or if you have one of the plastic ones. They will fit the MGTF, MGF. MGZR, Rover 25/200 etc.

The 52mm TB gives a crisper throttle response and a slight power gain.

They are genuine items fitted by MG made by Dellorto in Italy.

They are priced at £55 including delivery.

Payment by cheque or Bank Transfer please. Thanks

Let's block ads! (Why?)

52mm Throttle bodies For Sale

One more mod: dial aluminium ring & walnut background

Supporter

 

 

Join Date: May 2015

Location: Bioule, near Montauban, South West of France

Car: Rover 25 1.4 103bhp 3 d petrol 2002 MNX 41k ml / Fiat Punto roadster 1995 Bertone 1.6 90bhp 78k ml

Posts: 489

One more mod: dial aluminium ring & walnut background

---

The title says nearly all.
But mind you that cutting out that walnut paper was a bloody hell of a job!
Here is the block outside without its glassy protection, then the whole back in place:

Phew! What a relief... because taking off and back again all that stuff with those vicious screws nearly unreachable is not actually plain sailing...
But I'm happy now.

---

Last edited by Dorchester; Today at 21:06.

Let's block ads! (Why?)

One more mod: dial aluminium ring & walnut background